Procurement/Manufacture v1.0¶

Mechanical System¶

All of the items in the mechanical system are described on the wiki , and detailed information including measurements can be found in the BoM .

• The lumber used to build version 1.0 of the test stand was standard English unit stock, and could be purchased anywhere including Lowes and Home Depot in the U.S.
• The coarse thread drywall screws used as fasteners were standard English unit stock, and could be purchased anywhere including Lowes and Home Depot in the U.S.
• The drawer slide used as a linear guide is PN D80614C-ZP-W from Liberty Hardware .
• Several COTS (Commercial Off The Shelf) items were purchased as part of an engine mount kit from Estes Rockets :
  • Estes E Engine Mount Tube (PN 30463)
  • Estes E Engine Retainer Ring (PN 30160)
  • Estes E Spacer Ring (PN 35005)
  • Estes E Engine Block (PN 30174-S) - modified
  • Estes E Engine Hook (PN 35022)

Data Acquisition (DAQ) System¶

The items in the DAQ system are described on the wiki .

• The Arduino Uno (Rev 3) is readily available from many sources, but can be purchased for around $35 from both SparkFun and Radio Shack .