Snap Fit Tone Ring Assembly¶

• Snap Fit Tone Ring Assembly
  • Tools
  • Materials
  • Safety Issues
  • Product
  • Procedure
    • 1. Place Initial Magnet
    • 2. Place Remaining Magnets
    • 3. Verify Magnet Placement
    • 4. Fix Cover to Base
  • References

Tools¶

• Holoseat Test Stand
• Magnetic Compass

Materials¶

• Instant/super glue (prefer Loctite Super Glue Ultragel Control)
• (1) 18PTR-01: Snap Fit 18 Pole Tone Ring Base
• (1) 18PTR-02: Snap Fit 18 Pole Tone Ring Cover
• (18) 18PTR-03: N52 3/16" x 3/16" Neodymium Cylinder Magnets

Note: The final build requires (2) HS-03: Snap Fit 18 Pole Tone Ring Halves

Safety Issues¶

• Use safety glasses when working with small, high powered magnets to avoid eye injury from flying magnets
• Be sure to maintain physical control of magnets (those being placed and those already placed) to avoid flying magnets

Product¶

HS-03: Snap Fit 18 Pole Tone Ring Half

Procedure¶

1. Place Initial Magnet¶

...

2. Place Remaining Magnets¶

...

3. Verify Magnet Placement¶

Note: You will need (2) in progress HS-03: Snap Fit 18 Pole Tone Ring Halves for testing

1. Set up the Holoseat Test Stand
   1. Ensure the calibrated sensor is attached to the sensor controller
   2. Ensure the power and USB connections are all configured according to the test stand operating instructions
   3. Snap (2) in progress HS-03: Snap Fit 18 Pole Tone Ring Halves onto the tone ring adapter
      INSERT PIC
2. Run tone ring test(s)
   INSERT PIC
3. Remove the tone ring halves from the tone ring adapter

4. Fix Cover to Base¶

...

References¶

• What Are Magnetic Poles and How to Identify Them
• Reading a Compass