Snap Fit Tone Ring Assembly¶
Tools¶
- Holoseat Test Stand
- Magnetic Compass
Materials¶
- Instant/super glue (prefer Loctite Super Glue Ultragel Control)
- (1) 18PTR-01: Snap Fit 18 Pole Tone Ring Base
- (1) 18PTR-02: Snap Fit 18 Pole Tone Ring Cover
- (18) 18PTR-03: N52 3/16" x 3/16" Neodymium Cylinder Magnets
Note: The final build requires (2) HS-03: Snap Fit 18 Pole Tone Ring Halves
Safety Issues¶
- Use safety glasses when working with small, high powered magnets to avoid eye injury from flying magnets
- Be sure to maintain physical control of magnets (those being placed and those already placed) to avoid flying magnets
Product¶
HS-03: Snap Fit 18 Pole Tone Ring Half
Procedure¶
1. Place Initial Magnet¶
...
2. Place Remaining Magnets¶
...
3. Verify Magnet Placement¶
Note: You will need (2) in progress HS-03: Snap Fit 18 Pole Tone Ring Halves for testing
- Set up the Holoseat Test Stand
- Ensure the calibrated sensor is attached to the sensor controller
- Ensure the power and USB connections are all configured according to the test stand operating instructions
- Snap (2) in progress HS-03: Snap Fit 18 Pole Tone Ring Halves onto the tone ring adapter
INSERT PIC
- Run tone ring test(s)
INSERT PIC
- Remove the tone ring halves from the tone ring adapter
4. Fix Cover to Base¶
...
References¶