Procurement Manufacture v1 0

Version 10 (Jeremy Wright, 11/05/2012 04:08 pm) → Version 11/24 (Jeremy Wright, 11/05/2012 04:12 pm)

h1. Procurement/Manufacture v1.0

h3. Mechanical System

All of the items in the mechanical system are described on the "wiki":https://opendesignengine.net/projects/shepard-ts/wiki/Detailed_Design_v1_0#Mechanical-System , and detailed information including measurements can be found in the "BoM (Bill of Material)":http://opendesignengine.net/dmsf_files/18?download= .

* The lumber used to build version 1.0 of the test stand was standard English unit stock, and could be purchased anywhere including "Lowes":http://www.lowes.com and "Home Depot":http://www.homedepot.com in the U.S.
* The coarse thread drywall screws used as fasteners were standard English unit stock, and could be purchased anywhere including "Lowes":http://www.lowes.com and "Home Depot":http://www.homedepot.com in the U.S.
* The drawer slide used as a linear guide is PN "D80614C-ZP-W":http://www.libertyhardware.com/search/detail/?searchType=retail&ID=D80614C-ZP-W&FIN=ZP from "Liberty Hardware":http://www.libertyhardware.com .
* Several COTS (Commercial Off The Shelf) items were purchased from "Estes Rockets":http://www.estesrockets.com/ :
** Estes E Engine Mount Tube (PN "30463":http://www.estesrockets.com/rockets/accessories/engine-mounting/303159-d-and-e-engine-mount-kit)


h3. Data Acquisition (DAQ) System