Detailed Design v1 0
Version 2 (J. Simmons, 08/30/2012 07:23 pm) → Version 3/35 (J. Simmons, 08/30/2012 07:32 pm)
h1. Shepard Test Stand Detailed Design v1.0
{{toc}}
h3. Introduction
h3. Mechanical System
h4. Component Overview
!ShepardMechaniclComponentIdentification.png!
The Shepard Test Stand v1.0 mechanical system (pictured above) is made up of six key components. They are
# *Test Stand Base* *Base* - The *Test Stand Base* (*Base*) *Base* is constructed from ripped down 2x10 pine stock, and fits over a 4" x 8" x 16" (nominal) solid concrete block which is available at most hardware stores. The outer dimensions of the *Base* are 10-7/8" x 21-1/2" x 5-3/16", and its inner dimensions are 7-7/8" x 15-5/8" x 3-1/2". The key dimensions of the base are the inner dimensions (to allow the base to fit over the concrete block during operation) and an open platform of 20" in length to accommodate the *Test Section Beam*.
h3. DAQ
{{toc}}
h3. Introduction
h3. Mechanical System
h4. Component Overview
!ShepardMechaniclComponentIdentification.png!
The Shepard Test Stand v1.0 mechanical system (pictured above) is made up of six key components. They are
# *Test Stand Base* *Base* - The *Test Stand Base* (*Base*) *Base* is constructed from ripped down 2x10 pine stock, and fits over a 4" x 8" x 16" (nominal) solid concrete block which is available at most hardware stores. The outer dimensions of the *Base* are 10-7/8" x 21-1/2" x 5-3/16", and its inner dimensions are 7-7/8" x 15-5/8" x 3-1/2". The key dimensions of the base are the inner dimensions (to allow the base to fit over the concrete block during operation) and an open platform of 20" in length to accommodate the *Test Section Beam*.
h3. DAQ