Design Review
Version 3 (Jeremy Wright, 09/23/2013 09:00 am)
| 1 | 2 | Jeremy Wright | h1. Shepard Test Stand Design Review v1.1 |
|---|---|---|---|
| 2 | 1 | Jeremy Wright | |
| 3 | 3 | Jeremy Wright | *There was no formal review of the v1.1 design since it was a minor incremental upgrade.* |
| 4 | 3 | Jeremy Wright | |
| 5 | 1 | Jeremy Wright | * There are some design review items, as well as lessons learned about the Mach 30 design process "here":https://docs.google.com/document/pub?id=1Mf90mKULMSQIIxagVz8EoLMosPMmceKSIxPGebP4vyo . |
| 6 | 1 | Jeremy Wright | |
| 7 | 1 | Jeremy Wright | * There is some DAQ design review information "here":https://opendesignengine.net/boards/4/topics/255 on the forums. |
| 8 | 1 | Jeremy Wright | |
| 9 | 1 | Jeremy Wright | * A design issue that was brought up about the drawer slide used is "here":https://opendesignengine.net/boards/4/topics/247. It was later confirmed that this was actually a problem that surfaces after repeated motor firings. |
| 10 | 1 | Jeremy Wright | |
| 11 | 1 | Jeremy Wright | * A couple of areas where the DAQ system fell short of the requirements was brought up in the last post by Jeremy Wright "here":https://opendesignengine.net/boards/4/topics/159. |
| 12 | 1 | Jeremy Wright | |
| 13 | 1 | Jeremy Wright | This is a newer document based on "this one":https://opendesignengine.net/projects/shepard-ts/wiki/Design_Review_v1_0 , and you should refer to that original version if you want to see the revision history. |