History

Version 1/8 - Next ยป - Current version
J. Simmons, 10/14/2011 12:45 am

Workbench Instructions

  1. Assemble the top
    1. Mark framing (2x Part A) at 16" and 32" so you can line up the top's framing
    2. Assemble the top's frame (4x Part B between 2x Part A) using 2-1/2" sheetrock screws
    3. Align the clamp edges on the end of the short sides (this should create a frame that is 4'x4')
    4. Use clamps to hold the clamp edges in place and attach them to the from using 2-1/2" sheetrock screws (screw from the inside of the frame into the clamp edge)

step1_1.jpg (90.1 kB) J. Simmons, 10/14/2011 12:45 am

step1_2.jpg (103.1 kB) J. Simmons, 10/14/2011 12:45 am

step1_3.jpg (100.3 kB) J. Simmons, 10/14/2011 12:45 am

step1_4.jpg (118.1 kB) J. Simmons, 10/14/2011 12:45 am

step1_5.jpg (107.4 kB) J. Simmons, 10/14/2011 12:52 am

step1_6.jpg (105 kB) J. Simmons, 10/14/2011 12:52 am

step2_1.jpg (124.6 kB) J. Simmons, 10/14/2011 12:52 am

step2_2.jpg (89.7 kB) J. Simmons, 10/14/2011 12:52 am

step2_3.jpg (111.3 kB) J. Simmons, 10/14/2011 12:52 am

workbench_in_use.jpg (109.9 kB) J. Simmons, 10/14/2011 12:54 am

Also available in: HTML TXT