h1. Workbench Instructions

# Assemble the top
## Mark framing (2x Part A) at 16" and 32" so you can line up the top's framing
!step1_1.jpg!
## Assemble the top's frame (4x Part B between 2x Part A) using 2-1/2" sheetrock screws
!step1_2.jpg!
## Align the clamp edges on the end of the short sides (this should create a frame that is 4'x4')
!step1_3.jpg!
## Use clamps to hold the clamp edges in place and attach them to the from using 2-1/2" sheetrock screws (screw from the inside of the frame into the clamp edge)
!step1_4!