Edit History

WorkbenchInstructions

Version 1 (J. Simmons, 10/14/2011 12:45 am)

1 1 J. Simmons 
h1. Workbench Instructions
2 1 J. Simmons 






    3
    1
    J. Simmons
    
# Assemble the top






    4
    1
    J. Simmons
    
## Mark framing (2x Part A) at 16" and 32" so you can line up the top's framing






    5
    1
    J. Simmons
    
!step1_1.jpg!






    6
    1
    J. Simmons
    
## Assemble the top's frame (4x Part B between 2x Part A) using 2-1/2" sheetrock screws






    7
    1
    J. Simmons
    
!step1_2.jpg!






    8
    1
    J. Simmons
    
## Align the clamp edges on the end of the short sides (this should create a frame that is 4'x4')






    9
    1
    J. Simmons
    
!step1_3.jpg!






    10
    1
    J. Simmons
    
## Use clamps to hold the clamp edges in place and attach them to the from using 2-1/2" sheetrock screws (screw from the inside of the frame into the clamp edge)






    11
    1
    J. Simmons
    
!step1_4!