Controller Assembly
Version 3 (J. Simmons, 06/23/2018 05:47 pm)
| 1 | 1 | J. Simmons | h1. Controller Assembly |
|---|---|---|---|
| 2 | 1 | J. Simmons | |
| 3 | 1 | J. Simmons | {{>toc}} |
| 4 | 1 | J. Simmons | |
| 5 | 1 | J. Simmons | h2. Tools |
| 6 | 1 | J. Simmons | |
| 7 | 2 | J. Simmons | * Holoseat Test Stand with computer to operate it |
| 8 | 2 | J. Simmons | * Soldering iron with stand |
| 9 | 2 | J. Simmons | * Helping hands |
| 10 | 2 | J. Simmons | * Exhaust fan |
| 11 | 2 | J. Simmons | * Flush snips |
| 12 | 2 | J. Simmons | * Safety glasses |
| 13 | 1 | J. Simmons | |
| 14 | 1 | J. Simmons | h2. Materials |
| 15 | 1 | J. Simmons | |
| 16 | 1 | J. Simmons | * Instant/super glue (prefer Loctite Super Glue Ultragel Control) |
| 17 | 2 | J. Simmons | * Solder |
| 18 | 2 | J. Simmons | * (1) HSC-01: Feather |
| 19 | 2 | J. Simmons | * (1) HSC-02: Holoseat Controller Wing |
| 20 | 2 | J. Simmons | * (1) HSC-03: Controller Housing Base |
| 21 | 2 | J. Simmons | * (1) HSC-04: Controller Housing Top |
| 22 | 2 | J. Simmons | * (1) HSC-05: 12 pin header |
| 23 | 2 | J. Simmons | * (1) HSC-06: 16 pin header |
| 24 | 2 | J. Simmons | * (1) HSC-07: Holoseat Custom Key Cap |
| 25 | 2 | J. Simmons | * (1) HSC-08: TRRS Wing |
| 26 | 2 | J. Simmons | * (1) HSC-09: Keyswitch |
| 27 | 2 | J. Simmons | * (1) HSC-10: Controller Housing Mounting Slot |
| 28 | 1 | J. Simmons | |
| 29 | 1 | J. Simmons | h2. Safety Issues |
| 30 | 1 | J. Simmons | |
| 31 | 2 | J. Simmons | * Care must be taken when using the soldering iron, the tip is very hot |
| 32 | 2 | J. Simmons | * Always wear safety glasses while working with soldering irons |
| 33 | 2 | J. Simmons | * Avoid breathing in the soldering fumes, use a vent or hood if needed to provide adequate ventilation |
| 34 | 1 | J. Simmons | |
| 35 | 1 | J. Simmons | h2. Product |
| 36 | 1 | J. Simmons | |
| 37 | 2 | J. Simmons | HS-02: Controller |
| 38 | 1 | J. Simmons | |
| 39 | 1 | J. Simmons | h2. Procedure |
| 40 | 1 | J. Simmons | |
| 41 | 3 | J. Simmons | h3. 1. sss |