Resources
Version 23 (J. Simmons, 07/25/2016 10:12 am)
1 | 1 | J. Simmons | h1. Resources |
---|---|---|---|
2 | 1 | J. Simmons | |
3 | 3 | J. Simmons | h2. Propulsion Links |
4 | 3 | J. Simmons | |
5 | 3 | J. Simmons | * Cold Gas Thrusters |
6 | 3 | J. Simmons | ** "Cold gas systems":http://www.lr.tudelft.nl/en/organisation/departments/space-engineering/space-systems-engineering/expertise-areas/space-propulsion/propulsion-options/chemical-rockets/cold-gas/, from "TU Delft Aerospace Engineering Department":http://www.lr.tudelft.nl/en/ |
7 | 13 | J. Simmons | ** "Portland State Aerospace Society":http://psas.pdx.edu/ Cold Gas Thruster RCS for Roll Control |
8 | 17 | J. Simmons | *** "Steering High Altitude Rockets with Cold Gas":http://hackaday.com/2015/06/20/steering-high-altitude-rockets-with-cold-gas/ - check out the video in this article |
9 | 1 | J. Simmons | *** "Using the Intel Edison on a Cold Gas Reaction Control System for a Sounding Rocket":http://www.instructables.com/id/Using-the-Intel-Edison-on-a-Cold-Gas-Reaction-Cont/ (on Instructibles) |
10 | 14 | J. Simmons | *** "PSAS RCS Github Repo":https://github.com/psas/reaction-control |
11 | 1 | J. Simmons | **** "3D Printed Nozzles":https://github.com/psas/reaction-control/tree/master/3d%20Printing%20nozzles |
12 | 1 | J. Simmons | **** "Cutaway Demo Nozzle":https://github.com/psas/reaction-control/blob/master/3d%20Printing%20nozzles/deLaval%20cutaway.STL |
13 | 15 | J. Simmons | *** Photos from J's visit to PSAS |
14 | 15 | J. Simmons | **** "Prototype Cold Gas Thruster RCS Module":https://flic.kr/p/zJNC1U |
15 | 16 | J. Simmons | **** "Cold Gas Thruster Pod":https://flic.kr/p/AGPSiR |
16 | 16 | J. Simmons | **** "Cold Gas Thruster Cross Section":https://flic.kr/p/AFQhnH (printed from "Cutaway Demo Nozzle":https://github.com/psas/reaction-control/blob/master/3d%20Printing%20nozzles/deLaval%20cutaway.STL) |
17 | 14 | J. Simmons | ** "Cold Gas Thruster Block Diagram":http://opendesignengine.net/dmsf_files/511?download= |
18 | 3 | J. Simmons | |
19 | 1 | J. Simmons | h2. 3D Printing Links |
20 | 1 | J. Simmons | |
21 | 1 | J. Simmons | * "MatterControl":http://www.mattercontrol.com/ Slicer Settings Explained |
22 | 1 | J. Simmons | ** "Part 1":http://www.matterhackers.com/articles/slice-settings-explained-part-1 |
23 | 7 | J. Simmons | ** "Part 2":http://www.matterhackers.com/articles/slice-settings-explained-part-2 |
24 | 9 | J. Simmons | ** "Part 3":https://www.matterhackers.com/articles/slice-settings-explained---part-3 |
25 | 12 | J. Simmons | * Calibration Notes |
26 | 23 | J. Simmons | ** "A Guide to Understanding the Tolerances of Your 3D Printer":https://www.matterhackers.com/articles/a-guide-to-understanding-the-tolerances-of-your-3d-printer |
27 | 12 | J. Simmons | ** "3DBenchy":http://www.3dbenchy.com |
28 | 12 | J. Simmons | ** "Print Quality Troubleshooting Guide":https://www.simplify3d.com/support/print-quality-troubleshooting/#not-extruding-at-start-of-print |
29 | 22 | J. Simmons | ** "How to Solve the Most Common 3D Printing Problems":http://3dprintingforbeginners.com/troubleshoot-3d-printing-problems/ |
30 | 18 | J. Simmons | ** "2015 Make Magazine FDM Test Models":http://makezine.com/go/2015-fdm-test-criteria - updated test files that include tests for support material, horizontal surface finish, vertical surface finish, and dimensional accuracy |
31 | 20 | J. Simmons | ** "Developing a Warp-Index for 3D Printing":http://www.3ders.org/articles/20151130-kai-parthy-develops-low-bondage-warp-index-for-3d-printing-filaments.html |
32 | 19 | J. Simmons | ** "Retraction - Just Say No to Oozing":https://www.matterhackers.com/articles/retraction-just-say-no-to-oozing |
33 | 2 | J. Simmons | * 3D Printing Material Options |
34 | 2 | J. Simmons | ** "3DPrinting with High Strength Filaments for Drones":https://www.youtube.com/watch?t=34&v=FSR_v07X92k |
35 | 5 | J. Simmons | ** "Taulman 3D 'Bridge' Material":http://taulman3d.com/bridge-features.html |
36 | 8 | J. Simmons | ** "Taulman In-PLA":http://3dprint.com/62343/taulman3d-in-pla-filament |
37 | 6 | J. Simmons | * Techniques |
38 | 6 | J. Simmons | ** "Print Any Nut or Washer You Choose":http://3dprint.com/68289/3d-print-any-nut-you-choose/ |
39 | 9 | J. Simmons | ** "Printing working threads on an Ultimaker II extended":http://marcuswolschon.blogspot.com/2015/07/printing-working-threads-on-ultimaker.html |
40 | 11 | J. Simmons | ** "Make Skill-Builder: Finishing and Post-Processing 3D Prints":http://makezine.com/projects/make-34/skill-builder-finishing-and-post-processing-your-3d-printed-objects/ |
41 | 21 | J. Simmons | ** "Adding screw threads to 3D-printed parts":http://formlabs.com/stories/adding-screw-threads-3d-printed-parts/ |
42 | 12 | J. Simmons | * Books |
43 | 12 | J. Simmons | ** "3D Printing with MatterControl":http://www.apress.com/9781484210567 |
44 | 10 | Jeremy Wright | |
45 | 10 | Jeremy Wright | h2. CAD Links |
46 | 10 | Jeremy Wright | |
47 | 10 | Jeremy Wright | * "OpenSCAD Parametric DeLaval Nozzles (Conical and Bell)":https://github.com/Buback/ParametricDeLavalModel |