Yavin Thruster

h1. Resources

h2. Propulsion Links

* Cold Gas Thrusters

** "Cold gas systems":http://www.lr.tudelft.nl/en/organisation/departments/space-engineering/space-systems-engineering/expertise-areas/space-propulsion/propulsion-options/chemical-rockets/cold-gas/, from "TU Delft Aerospace Engineering Department":http://www.lr.tudelft.nl/en/

** "Portland State Aerospace Society":http://psas.pdx.edu/ Cold Gas Thruster RCS for Roll Control

*** "Steering High Altitude Rockets with Cold Gas":http://hackaday.com/2015/06/20/steering-high-altitude-rockets-with-cold-gas/ - check out the video in the article

*** "Using the Intel Edison on a Cold Gas Reaction Control System for a Sounding Rocket":http://www.instructables.com/id/Using-the-Intel-Edison-on-a-Cold-Gas-Reaction-Cont/ (on Instructibles)

*** "PSAS RCS Github Repo":https://github.com/psas/reaction-control

**** "3D Printed Nozzles":https://github.com/psas/reaction-control/tree/master/3d%20Printing%20nozzles

**** "Cutaway Demo Nozzle":https://github.com/psas/reaction-control/blob/master/3d%20Printing%20nozzles/deLaval%20cutaway.STL   

*** Photos from J's visit to PSAS

**** "Prototype Cold Gas Thruster RCS Module":https://flic.kr/p/zJNC1U

**** "16 PSAS Cold Gas Thruster Pod":https://flic.kr/p/AGPSiR

**** "17 PSAS Cold Gas Thruster Cross Section":https://flic.kr/p/AFQhnH

** "Cold Gas Thruster Block Diagram":http://opendesignengine.net/dmsf_files/511?download=

h2. 3D Printing Links

* "MatterControl":http://www.mattercontrol.com/ Slicer Settings Explained

** "Part 1":http://www.matterhackers.com/articles/slice-settings-explained-part-1

** "Part 2":http://www.matterhackers.com/articles/slice-settings-explained-part-2

** "Part 3":https://www.matterhackers.com/articles/slice-settings-explained---part-3

* Calibration Notes

** "3DBenchy":http://www.3dbenchy.com

** "Print Quality Troubleshooting Guide":https://www.simplify3d.com/support/print-quality-troubleshooting/#not-extruding-at-start-of-print

* 3D Printing Material Options

** "3DPrinting with High Strength Filaments for Drones":https://www.youtube.com/watch?t=34&v=FSR_v07X92k

** "Taulman 3D 'Bridge' Material":http://taulman3d.com/bridge-features.html

** "Taulman In-PLA":http://3dprint.com/62343/taulman3d-in-pla-filament

* Techniques

** "Print Any Nut or Washer You Choose":http://3dprint.com/68289/3d-print-any-nut-you-choose/

** "Printing working threads on an Ultimaker II extended":http://marcuswolschon.blogspot.com/2015/07/printing-working-threads-on-ultimaker.html

** "Make Skill-Builder: Finishing and Post-Processing 3D Prints":http://makezine.com/projects/make-34/skill-builder-finishing-and-post-processing-your-3d-printed-objects/

* Books

** "3D Printing with MatterControl":http://www.apress.com/9781484210567

h2. CAD Links

* "OpenSCAD Parametric DeLaval Nozzles (Conical and Bell)":https://github.com/Buback/ParametricDeLavalModel