Wave Articulation Matrix¶

The Wave Articulation Matrix is composed of concentric steel cylinders. The simplest design uses four cylinders. More sophisticated devices may have 6, 8, or any even number of cylinders.

Fig. 1.1: Wave Articulation Matrix -- 8-Element

All the cylinders have the same mass, and the same surface area.

The length of the innermost cylinder is equal to the circumference of the outermost cylinder. The length of the outermost cylinder is equal to the circumference of the innermost.

Fig. 1.2: Physical Dimensions -- Side View -- 8-Element WAM
Fig. 1.3: Physical Dimensions -- Top View -- 8-Element WAM
Fig. 1.4: Perspective Views -- 8-Element WAM

The WAM can be described as a Log Periodic Nested Waveguide. It is Log Periodic, in that, the radius of each element (counting from the innermost element, outwards) is equal to that of the previous element, multiplied by a constant. Likewise, the length of each element (counting from the outermost element, inwards) is equal to that of the previous, multiplied by that constant. The constant we use (our base of logarithms) is the Golden Ratio.

A Log Periodic Dipole Array is Log Periodic in one dimension, so a curve traced through the tips of its elements is a logarithmic curve. The WAM is Log Periodic in two dimensions simultaneously (radius, and length), so a curve traced through the bottom edges of its cylinders is a Hyperbola.

Fig. 1.5: The WAM is a Log Periodic Nested Waveguide

If we want to build a 4-element WAM around a 0.75 inch diameter acetel rod, using 0.002 inch thick steel shim stock, then Lambda = 10.008 inch.

Fig. 1.6: Example Dimensions -- 4-Element WAM
Fig. 1.7: Photo of 4-Element WAM

From a Golden Spiral to Gabriel's Horn¶

I would like to show you how the geometry of the Fountain can be derived from a Golden Spiral.

Let's take a look at a Golden Spiral.

Fig. 2.1: A Golden Spiral

A Golden Spiral is a kind of Logarithmic Spiral. Its radius multiplies by the Golden Ratio every quarter cycle. In the picture, the Golden Ratio is written as the Greek letter Phi.

Just to make things simpler, let's have our Golden Spiral grow by a factor of Phi every complete cycle, instead of every quarter cycle. Let's also look at our spiral sideways, and allow it to exist in the dimension of time. Now what does it look like?

Fig. 2.2: A Golden Spiral in Time

The envelope of the wave on the right is an exponential curve; the amplitude of the wave is growing exponentially.

Can our wave grow in any other way? Yes. Its frequency can grow as well as its amplitude. Let's make a wave where each time it completes one cycle, its amplitude has multiplied by the Golden Ratio, and its period has been divided by the Golden Ratio. Now what does our wave look like?

Fig. 2.3: A Golden Spiral with a Hyperbolic Envelope
Fig. 2.3.1: Explanation of the Logarithm Used in the Equation

This wave has a hyperbolic envelope, not an exponential one, as before.

We can also flip our wave around. This is perhaps the more general form of the equation.

Fig. 2.4: A Golden Spiral with a Hyperbolic Envelope -- a Chirp
Fig. 2.4.1: The Constant K Determines How Quickly the Wave Collapses

If we rotate the envelope of this wave around the Z-axis, we create a Hyperboloid.

Fig. 2.5: Gabriel's Horn

A Hyperboloid is also known as Gabriel's Horn, because it looks like the trumpet blown by Archangel Gabriel on the Last Day. It has finite volume, yet infinite surface area. This is also the correct shape of a vortex in water.

The cylinders of the Fountain are formed by taking slices of Gabriel's Horn.

Fig. 2.6: Wave Articulation Matrix and Gabriel's Horn
Fig. 2.7: Wave Articulation Matrix -- Perspective View

Wiring Diagrams¶

The circuit used to excite the WAM is very similar to a RADAR Modulator.

Fig. 3.0: RADAR Modulator is very Similar to WAM Exciter
Fig. 3.1: Simple Wiring Diagram

Let's call the innermost cylinder the Primary Axis, and the outermost cylinder, the Control Ring. Regardless of how many cylinders are in the WAM, all the cylinders between the Primary Axis and the Control Ring are tied together electrically, and provide the output of the device.

Fig. 3.2: Output Circuit

We recommend using a Hydrogen Thyratron, Spark Gap, or Gas Discharge Tube as the switching mechanism. This is because these devices switch from "OFF" to "ON" very quickly -- on the order of tens of pico seconds. Some fast IGBTs can switch in 20 - 50 nano seconds, but this is still 1000 times slower than a Thyratron. Why do we need such a fast switch? The switching time is directly proportional to the diameter of the first cylinder surrounding the Primary Axis. The Modes which this cylindrical waveguide can support are around 11 GHz for the 4-element WAM shown above. Larger structures would tolerate slower switching times.

Not a Steady State Device¶

The Fountain is not a steady state device. It is not excited by RF alternating currents. Rather, it is excited by Transients.

Fig. 4.1: Transients vs. Steady State AC

For an excellent introduction on Transients, please see:

Steinmetz, Charles Proteus, Elementary lectures on electric discharges, waves and impulses, and other transients

Pulsed DC, not AC¶

The Fountain is excited with pulsed DC, not AC. In a pulsed DC circuit, the magnetic field always spins the same direction. This is in contradistinction to the magnetic field in an AC circuit, which reverses direction repeatedly.

Fig 5.1: The Magnetic Field in a Pulsed DC circuit Always Spins the Same Direction

Discharge to Low Voltage, Not to Ground¶

In order to create the phenomenon, the following must be done:

1. One plate of a capacitor is connected to Earth Ground.
2. The other plate is charged to a high positive voltage (300-600V).
3. The capacitor is rapidly discharged (through a spark gap, or thyratron) to a low positive voltage (12V).
4. The capacitor is charged up again, and the process repeats.

Fig. 6.1: The Low Side of the Switch is Biased at +12v

One terminal of the spark gap is connected to a conductor, which is connected to the high voltage plate of the capacitor. The other terminal of the spark gap is connected to the positive terminal of a 12v battery. The negative terminal of the battery is connected to Earth Ground.

Transformation Between Extensive Space, and Gegenraum¶

Consider the concept of "Duality" in Projective Geometry, applied not to a particular solid, but to space itself.

Consider the transformation between the Infinite Plane (Euclidean Space), and the Point at Infinite Distance (Gegenraum). This transformation is represented by Gabriel's Horn.

See the Projective Geometry developed by George Adams and Rudolph Steiner.

Fig. 7.1: Growth Measure from Gegenraum to Extensive Space

Recursive Process¶

Editor's note: This technology comes to us by way of people whose native language is not English. We have done our best to express the important concepts involved in clear English. Here, however, we would like to quote verbatim their description of the recursive process which takes place when the Fountain is in operation.

Each time, Fountain Give Life,
Fountain become....

STRONGER.

So the next time, Fountain Give Life,
Fountain Give......

MORE LIFE.

MORE......
Than the time before.

Hai-lah! Fountain Give!