Hardware Setup
Version 3 (J. Simmons, 09/30/2018 08:11 pm) → Version 4/10 (J. Simmons, 09/30/2018 08:12 pm)
h1. Hardware Setup
{{>toc}}
h2. Tools
None.
h2. Materials
* (1) H-01: RTL-SDR Dongle
* (1) H-02: 1/4 Wave Monpole Antenna
* (1) H-03: TRAM NMO 5 1/2'' Magnet NMO Mounting with Rubber Boot
h2. Safety Issues
* Be careful of static discharge for the RTL-SDR dongle.
* Antenna is very conductive, be careful of electric shock near high voltage sources.
h2. Product
Full Hardware Assembly
h2. Procedure
h3. 1. Prepare Antenna
# Place *NMO Base* on a level surface
!prep_antenna_1.jpg!
# Screw *Monopole Antenna* onto *NMO Base*
!prep_antenna_2.jpg!
# Screw SMA connector end of *NMO Base* to the *RTL-SDR Dongle*
!prep_antenna_3.jpg!
# Plug *RTL-SDR Dongle* into your computer's USB port
!prep_antenna_4.jpg!
{{>toc}}
h2. Tools
None.
h2. Materials
* (1) H-01: RTL-SDR Dongle
* (1) H-02: 1/4 Wave Monpole Antenna
* (1) H-03: TRAM NMO 5 1/2'' Magnet NMO Mounting with Rubber Boot
h2. Safety Issues
* Be careful of static discharge for the RTL-SDR dongle.
* Antenna is very conductive, be careful of electric shock near high voltage sources.
h2. Product
Full Hardware Assembly
h2. Procedure
h3. 1. Prepare Antenna
# Place *NMO Base* on a level surface
!prep_antenna_1.jpg!
# Screw *Monopole Antenna* onto *NMO Base*
!prep_antenna_2.jpg!
# Screw SMA connector end of *NMO Base* to the *RTL-SDR Dongle*
!prep_antenna_3.jpg!
# Plug *RTL-SDR Dongle* into your computer's USB port
!prep_antenna_4.jpg!