Initial Questions

Version 8 (Jeremy Wright, 11/26/2013 11:33 am)

1 1 Jeremy Wright
h1. Far Horizons Project Initial Questions
2 1 Jeremy Wright
3 2 Jeremy Wright
4 2 Jeremy Wright
5 1 Jeremy Wright
Below is a list of questions and proposed answers to help define the requirements for this project retroactively. You can view the meeting minutes [[Meeting_1_-_Initial_Questions|here]]
6 1 Jeremy Wright
7 5 Jeremy Wright
h3. Q1. Why are we making this?
8 1 Jeremy Wright
9 7 Jeremy Wright
*A1*. Adler's original motivation for developing the *Far Horizons Project* High Altitude Balloon (HAB) program is to act as a gateway to developing "CubeSats":  Adler's design is highly influenced by assistance from L. Paul Verhage and his "book":  The *Far Horizons Project* has the added benefit of providing educational opportunities to practice near space missions with students and enthusiasts which fits in with Adler's goals of "democratizing space exploration":
10 1 Jeremy Wright
11 5 Jeremy Wright
h3. Q2. Who is this for?
12 1 Jeremy Wright
13 8 Jeremy Wright
*A2*. The *Far Horizons Project* is for anyone who wants to build experience in the area of near space missions.  This includes schools and school clubs, scouting troops, Makers and Maker Spaces.  Adler's goal is to help groups get the experience to fly their own missions.
14 1 Jeremy Wright
15 5 Jeremy Wright
h3. Q3. How will this be used?
16 1 Jeremy Wright
17 1 Jeremy Wright
*A3*. The HAB provides a platform to carry scientific and engineering payloads (no more than 12 lbs of total vehicle weight with individual payloads of 6 lbs or less) to a near space environment (exposing the vehicles and payloads to very low pressures and temperatures, and radiation levels significantly higher than those experienced on the ground) for a duration on the order of a couple of hours.
18 1 Jeremy Wright
19 5 Jeremy Wright
h3. Q4. What features does it need to have (now)?
20 1 Jeremy Wright
21 1 Jeremy Wright
*A4*. The High Altitude Balloon needs to:
22 1 Jeremy Wright
23 1 Jeremy Wright
* Operate safely throughout its flight
24 1 Jeremy Wright
* Operations should be flexible to deal with changing conditions on the ground (including adjusting for weight restrictions, winds, or other unexpected launch conditions)
25 1 Jeremy Wright
* The HAB needs to be trackable to facilitate recovery operations
26 1 Jeremy Wright
* The HAB needs to provide a soft landing
27 1 Jeremy Wright
* The HAB needs to support carrying experiment payloads (each payload container limited to 6 lbs)
28 1 Jeremy Wright
* The HAB total system weight must be under 12 lbs
29 1 Jeremy Wright
* The HAB should carry the payload to between 90,000 and 100,000 feet (27432 and 30480 meters)
30 1 Jeremy Wright
31 5 Jeremy Wright
h3. Q5. What features does it need to have (later)?
32 1 Jeremy Wright
33 1 Jeremy Wright
*A5.* Desired enhancements include:
34 1 Jeremy Wright
35 1 Jeremy Wright
* Controlled descent system (guided landings using parafoil kite to either hit or avoid landing sites)
36 1 Jeremy Wright
* Live two-way telemetry (or command & control) and the ability to receive live experiment and operations data
37 1 Jeremy Wright
* Stabilized platform system (Adler is making progress on this one)
38 1 Jeremy Wright
* Alternative balloon configurations (zero-pressure, super-pressure balloons)
39 1 Jeremy Wright
* Alternate lift gasses (Adler uses helium right now)
40 1 Jeremy Wright
* A structure to hold the balloon during filling operations and to automatically stop the filling operation for the desired lift
41 1 Jeremy Wright
42 5 Jeremy Wright
h3. Q6. What are the legacy requirements?
43 1 Jeremy Wright
44 1 Jeremy Wright
*A6*. The HAB must comply with FAA regulations ("FAR 101":
45 1 Jeremy Wright
46 5 Jeremy Wright
h3. Q7. Who's going to build this?
47 1 Jeremy Wright
48 1 Jeremy Wright
*A7*. Small teams (2-3 members minimum) of volunteers, students, and space enthusiasts.  The designs are openly licensed so anyone can put together a team to build and operate a *Far Horizons Project* HAB.  Note, while the technical requirements to build the HAB are small, an amateur radio license is required to run the tracking radios during missions.
49 1 Jeremy Wright
50 5 Jeremy Wright
h3. Q8. How many do we want to make?
51 1 Jeremy Wright
52 1 Jeremy Wright
*A8*. We expect teams will want to build one or more systems (the reusable components of the HAB) for their own use.  Note, each mission requires the purchase of a new balloon envelope and lifting gas.
53 1 Jeremy Wright
54 5 Jeremy Wright
h3. Q9. What is the budget?
55 1 Jeremy Wright
56 1 Jeremy Wright
*A9.* The budget for a first flight (build and operation of one HAB) is $300.  Future versions with more robust tracking and payload systems will require additional investment.
57 1 Jeremy Wright
58 5 Jeremy Wright
h3. Q10. What is the timeline?
59 1 Jeremy Wright
60 1 Jeremy Wright
*A10*. The first build by an outside group ("Quelab": is anticipated to take approximately 4 weeks.
61 1 Jeremy Wright
62 5 Jeremy Wright
h3. Q11. What waste products will be produced by the manufacture and/or operation of this?
63 1 Jeremy Wright
64 1 Jeremy Wright
*A11.* Each flight will require the disposal of a latex balloon (part of which will be lost in the sky) and lithium batteries.  Construction materials include "pink insulating foam".