Meeting Minutes Dec 26, 2011¶
Agenda¶
- Test Wave Shield
- Review Wave Shield Source code
- Develop punch list to finish the project
Location¶
Dayton Diode
Start-End Times¶
1930-2105
Attending¶
Liz, J.
Discussion¶
- Test Wave Shield
- Loaded Wave Shield library and sample code on to arduino with a sample sound file
- We did not wire up the button, just set the arduino to play a file (see attachments: DO.WAV) in a loop with 1 second delay
- Wave Shield worked (note, first demo file would not load, will need to be sure to pay attention to the file conversion notes)
- Review Wave Shield Source code
- discussed how the program worked line by line
- Develop punch list to finish the project
- need physical adaptor for the arduino's power supply (source = Radio Shack)
- Items to finish wiring up the button
- 2 female RCA connectors to hook up to the arduino and the button so we can connect the button with an RCA cable (maybe just buy a short RCA cable with female ends instead of male ends)
- 6' RCA cable
- 10 Kohm resistor
- misc. wire, etc for hooking everything up
- Audio file from Boonshoft
- Look into buying an enclosure for the arduino to be mounted in