h1. Meeting Minutes Dec 26, 2011

h2. Agenda

* Test Wave Shield
* Review Wave Shield Source code
* Develop punch list to finish the project

h2. Location

Dayton Diode

h2. Start-End Times

1930-2105

h2. Attending

Liz, J.

h2. Discussion

* Test Wave Shield
** Loaded "Wave Shield library":http://code.google.com/p/wavehc/ and "sample code":http://www.ladyada.net/make/waveshield/libraryhcplay6.html on to arduino with a sample sound file
** We did not wire up the button, just set the arduino to play a file (see attachments: DO.WAV) in a loop with 1 second delay
** Wave Shield worked (note, first demo file would not load, will need to be sure to pay attention to the "file conversion notes":http://www.ladyada.net/make/waveshield/convert.html)
* Review Wave Shield Source code
** discussed how the program worked line by line
* Develop punch list to finish the project
** need physical adaptor for the arduino's power supply (source = Radio Shack)
** Items to finish wiring up the button
*** 2 female RCA connectors to hook up to the arduino and the button so we can connect the button with an RCA cable (maybe just buy a short RCA cable with female ends instead of male ends)
*** 6' RCA cable
*** 10 Kohm resistor 
*** misc. wire, etc for hooking everything up
** Audio file from Boonshoft
** Look into buying an "enclosure":https://www.google.com/search?aq=f&sourceid=chrome&ie=UTF-8&q=arduino+cases#pq=arduino+cases&hl=en&cp=13&gs_id=m&xhr=t&q=arduino+enclosure&tok=aXNnO-826Jy95TW8jWFa9g&pf=p&sclient=psy-ab&biw=1167&bih=737&source=hp&pbx=1&oq=arduino+enclo&aq=0&aqi=g3g-m1&aql=&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=edac7eaee598044 for the arduino to be mounted in