h1. Assembly Instructions

{{toc}}

h2. Introduction

TBD

h2. Test Stand Body Assembly

h3. Tools - Test Stand Body

* Mitre Saw (preferably powered)
* Carpentry square
* Tape Measure
* Screw Gun
* 1/16" Drill bit (for TS-07: 1-1/4" Fine Thread Drywall Screws)
* 1/8" Drill bit (for TSB-03: @#9@ x 2-1/2" Coarse Thread Drywall Screws)
* Phillips screw driving bit

h3. Materials - Test Stand Body

* 

h3. Safety Issues - Test Stand Body

* TBD

h3. Product - Test Stand Body

(1) Holoseat Test Stand Body

h3. Procedure - Test Stand Body

# TBD