Issues

Filters

Apply Clear

Toggle_check # Project Tracker Status Priority Subject Assignee Updated
120 AttenuatorXBugNewNormalSomething in my design seems to cause failures on pin PC1 when the Brown-out detection is enabled on the AVR microcontroller.02/11/2013 08:29 pm
119 AttenuatorXBugNewHighNo strain relief was provided for the battery connection.02/11/2013 08:27 pm
118 AttenuatorXBugNewHighThe LEDs displaying attenuation level are in opposite order. MSB should be on the left, like the silkscreen, but it’s on the right.02/11/2013 08:27 pm
117 AttenuatorXBugNewNormalThe pad I designed for the on-off switch isn’t wide enough. With enough solder, it works, but it’s not right.02/11/2013 08:26 pm
115 AttenuatorXBugNewNormalThe header should be SMT (as I already determined in the BOM), not through-hole (as I designed the board), and it should be on the bottom of the board.02/11/2013 08:25 pm
232 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalBuild the X and Y axes11/02/2013 06:33 pm
231 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalBuild the Y axis11/02/2013 06:32 pm
230 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalDesign X and Y axes11/02/2013 06:31 pm
229 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalFlash an ATMEGA328 with grbl firmware11/02/2013 06:15 pm
228 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalDesign the base (table)11/02/2013 06:12 pm
227 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneNewNormalBuild the base (table)11/02/2013 06:12 pm
226 CNC Mill: 4x8 Wood (<$500), Fresno IdeaworksMilestoneIn ProgressNormalAssemble Stepper Motor Driver BoardsSteve Popenoe11/02/2013 05:27 pm
52 Dante FurnaceSupportIn ProgressNormalSource02/18/2012 10:16 pm
70 Epoxy Granite CNC MillMilestoneNewNormalPour BaseBrandin Watson07/13/2012 08:51 pm
69 Epoxy Granite CNC MillFeatureNewNormalMake MoldBrandin Watson07/13/2012 08:48 pm
68 Epoxy Granite CNC MillFeatureNewNormalFinish v1 design of millBrandin Watson07/13/2012 08:43 pm
67 Epoxy Granite CNC MillFeatureNewNormalVacuumTrenton Wilson07/13/2012 08:40 pm
65 Far Horizons ProjectMilestoneIn ProgressNormalAdler Planetarium Documentation Visit06/26/2012 06:59 pm
146 Groundstation v.2.0MilestoneNewNormalCreate body of documentationAaron Harper07/22/2013 11:34 pm
145 Groundstation v.2.0MilestoneNewNormalConnect Receiver and test satellite receptionAaron Harper07/02/2013 05:57 pm
144 Groundstation v.2.0MilestoneNewNormalComputer controlAaron Harper07/02/2013 05:56 pm
143 Groundstation v.2.0MilestoneNewNormalAssemble ground station Az-El mountAaron Harper07/02/2013 05:54 pm
142 Groundstation v.2.0MilestoneNewNormalOrder components and prepare preliminary assembliesAaron Harper07/24/2013 10:24 pm
141 Groundstation v.2.0MilestoneNewNormalGround Station DesignAaron Harper07/21/2013 10:51 pm
140 Groundstation v.2.0MilestoneNewNormalFeature requests and design requirements (SEP)Aaron Harper07/15/2013 02:28 pm
139 Groundstation v.2.0MilestoneNewNormalGround station overviewAaron Harper07/15/2013 02:29 pm
277 HoloseatBugIn ProgressNormalApp window renders below full resolution on high resolution screenJ. Simmons11/11/2017 06:50 pm
172 Laboratory EKG Pre-AmplifierMilestoneNewNormalMachine 15 Enclosure Lids/BodiesAmanda Wozniak09/04/2013 02:03 pm
171 Laboratory EKG Pre-AmplifierMilestoneNewNormalFind a Workable Drill Templating SolutionAmanda Wozniak09/04/2013 02:03 pm
169 Laboratory EKG Pre-AmplifierBugNewNormalEnclosure Marking/Machining Accuracy IssueAmanda Wozniak09/03/2013 12:08 pm
275 Level 2 High-power rocketMilestoneNewNormalDetermine rocket design01/22/2017 07:51 am
274 Level 2 High-power rocketMilestoneNewNormalProcure materials01/22/2017 07:51 am
269 Mach 30 Technical RoadmapSupportNewHighAdd brief description to launch vehicle sub-systems to introduce them as discussion topicsAaron Harper10/07/2014 08:04 pm
267 Open Design EngineFeatureNewNormalAdd Companies PluginChristopher Sigman09/11/2014 07:11 pm
266 Open Design EngineFeatureNewNormalUpgrade fundraising plugin to include more sitesChristopher Sigman09/11/2014 06:52 pm
265 Open Design EngineBugNewHighSCM URL in project settings is incorrectJ. Simmons09/03/2014 07:12 pm
264 Open Design EngineBugNewNormalNew Project Creation Does Not Require Selection of Software or Documentation LicensesChristopher Sigman08/19/2014 11:05 am
263 Open Design EngineFeatureNewLowThingTracker Integration08/11/2014 08:13 am
260 Open Design EngineFeatureNewNormalFor Pay Private Projects07/29/2014 06:21 pm
250 Open Design EngineFeatureNewNormalBread Crumb Navigation07/09/2014 01:49 pm
217 Open Design EngineMilestoneNewNormalMigrate ODE source code to match current version of RedmineChristopher Sigman09/01/2014 04:13 pm
195 Open Design EngineBugNewNormalInconsistent visual layout between project tabs09/24/2013 07:56 am
191 Open Design EngineFeatureNewLowAllow Voting For Features09/21/2013 12:09 pm
190 Open Design EngineFeatureNewNormalShipper tracking wiki macro09/18/2013 04:23 pm
189 Open Design EngineFeatureNewNormalImplement a "karma" system09/18/2013 04:26 pm
188 Open Design EngineFeatureNewNormalCreate project "Contact us" pages09/24/2013 07:55 am
187 Open Design EngineFeatureNewNormalAutomatic site submissions to Google for projects and their pages09/18/2013 04:25 pm
186 Open Design EngineFeatureNewNormalUpverter wiki macro09/18/2013 04:25 pm
185 Open Design EngineFeatureNewNormalAdd video conferencing support09/20/2013 09:16 am
184 Open Design EngineFeatureNewNormalAdd STL part editor using OpenJsCad07/24/2019 06:30 am

1 2 3 Next » (1-50/133) | Per page: 25, 50, 100

Also available in: Atom CSV PDF