h1. Software Setup

{{>toc}}

h2. Introduction

These instructions cover the software set up of the Ground Sphere Mk3.

Note, these steps are for Windows (tested on Windows 10).

h2. 1. Download required Software

# Download the following files
## "Windows SDR Package - SDR Sharp": https://airspy.com/download/ (ver 1.0.0.1443)
## "WXtoImg": https://wxtoimgrestored.xyz/downloads/ (ver 2.10.11)
## "VBCable": https://www.vb-audio.com/Cable/ (pack 43)

h2. 2. Install SDR Tools

# TODO

h2. 3. Install WXtoImg

# TODO

h2. 4. Install VBCable

# TODO